| Customization: | Available |
|---|---|
| Material: | Water - Based Coating |
| Package: | Barrel |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product Introduction
Non-curing rubber asphalt waterproof coating is a waterproof coating made of rub-ber and asphalt as the main components and mixed with additives to maintain vis.cous paste in the service life. Non-curing rubber asphalt waterproof coating ismade of high-quality petroleum asphalt, functional polymer modifier and specialadditives to optimize and mix, and maintain viscous paste in the practical process.With self-healing, anti-leakage, anti-channeling, aging resistance and other characteristics.
Product Features
1. Self-Healing: construction materials wil not be separated, the overall stability of the waterproof layer, seamless. Even if the waterproof laver is damaged during the construction process, it can repair itself to prevent water from fowing in the waterproof laver
2. Adhesion: waterproof material can be bonded with the structure in water, and stll play a waterproof role when the structure changes.
3. Heat resistance and cold resistance: it does not lose its waterproof effect in high and low temperature changes
4. Creep: When the expansion joint changes due to temperature and other factors, it can move with the water flow
Chemical resistance: no change in performance due to the presence of various chemical substances (acid, alkali and salt
Standard: JC/T864-2008
| SN | Item | Parameter | ||
| I | II | |||
| 1 | Tensile Strength, MPa ≥ | 1 | 1.5 | |
| 2 | Elongation at Break, % ≥ | 300 | ||
| 3 | Low - temperature Flexibility, bent 180° around a Φ10mm rod | -10°, No cracks | -20°, No cracks | |
| 4 | Water Impermeability, (0.3MPa, 30min) | Water - impermeable | ||
| 5 | Solid Content /% ≥ | 65 | ||
| 6 | Drying Time, h | Surface - drying Time ≤ | 4 | |
| Through - drying Time ≤ | 8 | |||
| 7 | Retention Rate of Tensile Strength after Treatment, % | Heat Treatment ≥ | 80 | |
| Alkali Treatment ≥ | 60 | |||
| Acid Treatment ≥ | 40 | |||
| Artificial Weathering Treatmentª | - | 80 - 150 | ||
| 8 | Elongation at Break after Treatment, % | Heat Treatment ≥ | 200 | |
| Alkali Treatment ≥ | ||||
| Acid Treatment ≥ | ||||
| Artificial Weathering Treatmentª ≥ | - | 200 | ||
| 9 | Thermal Expansion and Contraction Rate, % | Elongation ≤ | 1 | |
| Contraction ≤ | 1 | |||
){kind=link}